Your browser is no longer supported. Please upgrade your browser to improve your experience.

WZ4 16:2

16in Analogue Console

16in Analogue Console

WZ4 16:2 is a true all-purpose mixer, providing a full 16 high specification mic/line inputs in a compact, straightforward format that has made it a consistent best seller.


16 Mic/Line Inputs

16 mic/line inputs with balanced XLR/TRS jack feed our renowned clean and detailed preamp design.


Dual FX Engines

Two digital FX engines with 20 studio quality FX presets designed by the DSP team responsible for our digital flagship mixers.


6 Auxes

Flexible aux section with 2 pre-fade, 2 switched and 2 post-fade sends.


2 Stereo Returns

A pair of dedicated stereo return channels make it easy to connect external FX or stereo line-level sources.

Preamp

Clean and Detailed Sound

The MixWizard4 preamp delivers extremely low noise, minimal distortion, wide yet smooth gain law and plenty of headroom. The preamp was developed by leading analogue designer Mike Griffin and is adapted from the design used on our legendary large-format analogue consoles.

Sends

Comprehensive Aux System

All MixWizard4 models offer a generous 6 auxes, each with its own master level rotary control and impedance-balanced TRS outputs. A clever monitoring system lets you listen to aux outputs in mono or in stereo pairs. Auxes 1-2 are routed pre-fade for monitors; auxes 3-4 are switchable pre or post-fade for monitors, FX or additional recording or zone feeds; and auxes 5-6 are routed post-fader for FX and aux-fed sub. These pre/post settings can be changed via internal jumpers.

QCC

Fits Anywhere

Our unique QCC (Quick Change Connectors) system lets you swiftly change the position of the connector panel to suit desktop, rack or flightcase mounting. The hard plastic side trims can also be removed to reveal the integral rack ears.

FX

Dual Engine Effects

WZ4 12:2 and WZ4 16:2 are both equipped with 2 stereo FX engines, providing 20 studio-quality FX presets. The FX interface has also been upgraded, with a 7-segment LED display, tap tempo and an encoder to adjust FX parameters. The FX algorithms were developed by the same in-house team that created the highly respected FX suite for our digital touring mixers.

Features

19″ Rack mountable

16 mic/line inputs with balanced XLR/TRS jack, insert and direct output

100mm faders

4 band EQ with 2 swept mids

6 Aux sends

  • 2x pre fade
  • 2x post fade
  • 2x switched

2 Stereo returns

Dedicated mono output fader

  • Can be switched to provide an L+R mono feed for a centre or fill speaker, or sub bass feed

Independent A-B output for 2-track recording, monitor foldback, speaker fills etc

Tri-colour, 12 segment bargraph metering

Twin FX engines with 20 studio quality FX presets

+48V Phantom Power

Signal and Peak LEDs

Lamp socket

Footswitch connector (mutes/unmutes the ST1 FX Return)

Downloads and Documents

The latest Firmware, documents, specifications and downloads, as well as useful links to support, all in one place



Resources

Sign up to the Newsletter

Keep up with the latest news and product developments from Allen & Heath.